project report on sms based patient monitoring system pdf

How are patient health parameters recorded and sent to the patient?

From the transmitter, the recordings of patient health parameters are sent as an SMS to the caretaker or the expert or a doctor which have been given as the recipient. Not only we send the information through the GSM module as SMS, but we also display the readings on LCD.

What data is sent to the microcontroller from the patient?

We have monitored temperature, Humidity and Heart Beat of the Patient and the Data collected by these sensors are sent to the Microcontroller. The Microcontroller then transmits the data to the user in the form of SMS. Here we are using the GSM modem in order to transmit the information.

How to transmit patient health parameters through GSM modem?

Here we are using the GSM modem in order to transmit the information. From the transmitter, the recordings of patient health parameters are sent as an SMS to the caretaker or the expert or a doctor which have been given as the recipient. Not only we send the information through the GSM module as SMS, but we also display the readings on LCD.

How to improve the efficiency of hospital patient care system?

For more versatile medical applications, this project can be improvised, by incorporating blood pressure monitoring systems, dental sensors and annunciation systems, thereby making it useful in hospitals as a very efficient and dedicated patient care system. f CONTENTS TITLE PAGE NO 1. BLOCK DIAGRAM 1 2. INTRODUCTION 2 3.

Figures

block diagram of atmega328 The Atmel®AVR®AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle.

References (4)

Current wireless technologies, such as wireless body area networks and wireless personal area networks, provide promising applications in medical monitoring systems to measure specified physiological data and also provide location-based information, if required.

What is SMS based patient health monitoring?

Applications of “SMS based Patient health Monitoring using GSM modem” project: 1. This project can be used in home for patients or ill person or old person to monitor their health parameters. 2. Same project can be used in hospitals.

What are the advantages of GSM interfacing?

Advantages: 1. It is fully automated system and does not require any human attention. 2. Automatic alert system using a buzzer gives intimation to user. 3. GSM interfacing provides a feature of remote monitoring of patient health parameters.

What is GSM based patient monitoring system?

The project “GSM Based Patient Monitoring System Using Biomedical Sensors” is made as explained in above chapters. It is necessary to check the system is working properly or not. It can be tested in two methods. The system should display the current temperature and pulse rate. The system should also send text messages to the concerned person or doctor using the GSM Module.

What is WSN in health monitoring?

Now Recently Wireless Sensor Networks (WSN) play a vital role in the research, technological community hence resulting in the development of various high-performance smart sensing system. Many new research is focused at improving quality of human life in terms of health by designing and fabricating sensors which are either in direct contact with the human body (invasive) or indirectly (noninvasive) in contact. Health monitoring is an informal, non-statutory method of surveying our workforce for symptoms of ill health, including lower back pain. This type of occupational health management system can enable us, as an employer, to be aware of health problems and intervene to prevent problems being caused or made worse by work activities. Another important role of health monitoring is to give feedback into a system that reviews the current control methods in place. In addition, there are specific regulations dealing with manual handling and whole body vibration in the workplace. To ensure we are complying with our duties under these regulations we should refer to HSE (health system engineering) guidance, if manual handling or whole body vibration are risks in our workplace. Whole body vibration is particularly prevalent in those that drive industrial and parameters and the sampled parameters are wireless.

Is a heart monitor easy to understand?

Optical heart-rate monitors are easy to understand in theory . If we’ve ever shined a flashlight through our finger tips and seen our heart-beat pulse (a thing most kids have done) we have a good handle on the theory of optical heart-rate pulse sensors.